Shenzhen Jirui Packaging Materials Co., Ltd

Contact:Mr. Zou




Add:Floor 2, Building 16, Baohua Industrial Zone, West Industrial Park, Longhua New Area, Shenzhen

EVA foam double-sided adhesive products should pay attention to what matters
Issuing time:2017-12-07 22:03

EVA foam tape adhesive products are paper, cloth, EVA film as the backing material, then the elastic body pressure sensitive adhesive or resin pressure-sensitive adhesive evenly coated on the substrate roll made of adhesive tape, is by the base material, adhesive, segregation paper (film) of three parts. According to the adhesive, it can be divided into solvent type adhesive tape (oily double-sided adhesive), emulsion adhesive tape (water-based EVA double-sided adhesive products), hot-melt adhesive tape, compression-type adhesive tape and reactive adhesive tape. It is widely used in leather, Ming board, stationery, electronic, automotive trim, shoe industry, paper, handicraft paste positioning and so on. Hot-melt adhesive is mainly used in stickers, stationery, office and other aspects. EVA foam double-sided adhesive products is a lot of more phyletic: grid EVA double-sided adhesive products, reinforcing EVA double-sided adhesive products, RubberEVA temperature double-sided adhesive products, EVA double-sided adhesive products, non-woven fabric, EVA double-sided adhesive products, no residual adhesive EVA double-sided adhesive products, cotton paper, EVA double-sided adhesive products, glass, EVA double-sided adhesive products, PET tape, EVA foam double-sided adhesive products, such as the production process is applied to all walks of life. Sometimes there will be a EVA foam double-sided adhesive products failure phenomenon, it is the double of new bought glue is completely not sticky, in this case, is not your double-sided adhesive failure, but EVA foam double-sided adhesive products using the environment makes it unusable. Here is a reminder: the following situations may render the double-sided adhesive useless.

1. The surrounding environment is too low, which causes the activity of EVA foam double-sided adhesive products to be reduced and other objects cannot be adhered to. Paste the ideal temperature for 15 and 38 ℃, not less than 10 ℃.

2. The stage standard of double-sided tape adhesion is too smooth, which leads to the inability of EVA double-sided adhesive products to stick.

3. Objects have sundries, particles and so on, which also causes them to be unable to stick to them.

4. There is water on the surface of the stage. Whenever there is water, there is no adhesion to other stage, no matter what EVA double-sided adhesive products are unusable.

5. When there is a bubble sticking in the adhesive products, we should attach one end to the other and then press it to the other side to reduce the chance of bubbles.